Hermes 3000 Serial Numbers Updated!

The whole saga of translating the Hermes 3000 Service Manual started actually with a request to update the serial numbers from new info. The service manuals were that info:

There it was, Jacques Perrier had uploaded his French H3K service manuals to his museum’s website, and in the front of each was some factory age lists for each variation, along with a few other relevant data points. Dan had read these and noted that the 1971 number reported in the manuals was smaller than what we had, and some other details served to confirm more detail about the transitions between the model eras. It proved that (for some reason unknown) our previous sources had veered suddenly from reporting January Hermes numbers in 1971 to December ones, at least for this model.

There always was a disturbing nearly 4 million serial number gap between 1970 and 1971, and here was a chance to clarify it.

Here’s what we had this morning..

And here’s what we have now:

As you can see, there are other tidbits in there from the manuals, but for now, the sources:

You might notice some corrections to what’s stated in the sources, and from the info teaser pages I posted in the last post. That’s because I proofed my work with one of the really awesome tools the TWDB has for when you want to spot incongruities in your data. But, it’s sort of my habit to re-date machines in the database when I make major changes to the serial number page and I needed to make all the machines made past 1970 one year newer, so I had to fire up the BMYS Tool (By Model/Year/Serial#) anyway.

As I check every machine on the BMYS list (all 100 of them!) I check it against my shiny new serial number list and make sure it’s where it is supposed to be in the timeline. There are certain details that immediately become obvious when I do this, like this machine, which shouldn’t exist, because the source says the HP-2/58 model ended with serial #3,351,399. Maybe they meant to type a “7” instead of a “1”? Yeah, we’ll go with that.

Anyway, here’s all the HP-2/58’s in TWDB:

Wow, there’s a lot of ’em, eh? It turns out that this variation is clearly not the rarest, and since around 357,000 were produced – and these built like tanks, they aren’t hard to find.

In March 1966, above, you notice the boxy square-top H3K’s start showing up. This HP-2/66 variation was produced for another 4 years.

Well, maybe not as popular with collectors, but would you believe that they are in fact the rarest? Yep, only about 267,000 made it off the line.

There’s also where the BMYS Tool paid off again. Check out when the serial number jump happens above. Yeah, way early in 1970, while the HP-2/66 is still being made. Weird. The sources weren’t specific, but gave me the impression that the serial jump had happened in November, coinciding with the introduction of the new HP-2/71 model. I’ll have to correct the service manual info sheets too, because I made some assumptions there that BMYS clearly contradicted. You see the earliest example we have of the HP-2/71 just above in the lower right corner. 

And finally, the newly corrected post-1970 H3k’s:

Yowza, not very many of them in collections, and that’s odd, because by my estimate, some 450,000 of the HP-2/71 variation were built. 

Anyway, that’s the fix for Hermes 3000. If you have one you think was made in 1970 or later, better re-check, they’re all pretty much a year newer than you think.

Updated: October 25, 2018 — 10:06 pm

7 Comments

Add a Comment
  1. Great work Ted! Thanks!

    I hope to recheck all of mine because I’m sure I have some that are not in the database. I’m curious if the numbers from 1966 still show that as the transition year for round to square bodies. I recently found that 1966 was also the year that the Rocket body changed. Slightly, but changed.

    1. Yep, May 1966 for the transition from the 58 to 66. If the service manuals are to be believed, Rocket/Baby went through major transformations in 1940, (probably also 1950), 1954, 1960 and 1964. At least those are the ones I know of so far.

  2. I am very grateful for the TWDB and its mastermind. That’d be you.

  3. I just purchased a beautiful, mint Hermes 3000 S made in Poland with serial number 7130980. This number indicates it was made in 1971, but I don’t believe this is correct. It’a a metal body with a plastic cover and has a shorter carriage return. Mr.Typewriter, has a photo of one on his website and says this was the last model 3000 made up through the 1980s. Can someone clarify this for me? Thanks,
    Tim Champlin

    1. If the nimber doesn’t seem right, double check your number and make sure you aren’t missing a digit.

  4. We have 33455227

  5. Purchased today the Hermes 3000 HP-2/66
    Square-top metal-shelled
    In perfect state, looks like new, incredible.
    This one is made in 1968
    Serial number 3515062 with French Azerty setup

Leave a Reply to Richard P Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.